CLEAN TECHNOLOGY AND RESOURCE MANAGEMENT  2019-20Resource-product-waste Cycle for Papers SummaryIn, the Aims and the objectives of this Essay is based on main points about the resource of the papers, paper product and papers waste cycle, the impacts on the environment and what the options to avoid this impacts. generally, according to the researchers, the papers products is an easy material to recycle,  recover and reuse, in addition, less industry pollute and effect on our environment if we compared with other materials like plastic and metal products, but the main impact from this industry on forests(the woods), because it is the raw material and this can cause problems on our natural resources and change on the climate.Table of ContentsSummaryIntroductionThe Resources and Raw materialsPaper products and manufacturePaper disposal and life cycleConclusions and RecommendationReferences IntroductionThe paper industry is one of the largest in the world, with global paper production in 2013 Approximately about 403 million tons. (Pratima Bajpai, 2016). It is command and control mainly by the United States, Canada, Finland, Sweden, Japan and some country like India and China are expected to be key in this industry’s growth over the near future. (Pratima Bajpai, 2012). The process of making paper became highly cost-sensitive, and the result of this increased productivity and quality of the paper, connected with environmental regulatory pressures, Most of the manufacturing facilities in the paper industry are accommodate and link with another industry. Paper industry begins with wood chipping at the front end, followed by pulping, bleaching, papermaking, and recycling of post-consumer products. (Pratima Bajpai, 2016).According to Pratima Bajpai,  the chemicals and technologies that used in the manufacturing papers expected to open new opportunities for the growth of the market. in addition, technological innovation, focusing on sustainable processes to minimise environmental impact is expected to be the most important factor for market development. (Pratima Bajpai, 2016).In this Essay, I will descript the most stages and life cycle of the paper, start by the main resources and raw material of the papermaking and I will focus on the most important resources(the wood fibre). Then descript the main manufacture processes,  finally, the disposal of papers and will consider the environmental impacts at each stage and the options for reducing waste and pollution, and the opportunities can be used to converting wastes to resources.The Resources and Raw materialsThe paper basically is made from pulp, this pulp can be made from wood,cotton, waste and other materials but the wood is main original raw material, this main raw material produces the resources of paper called cellulose comes from the fibre of the wood. The Cellulose fibre normally can find in many vegetable tissues extracted by mechanical or chemicals. (2)There is numbers of species yielding fibre can be used for paper but in practice fibre suitable for paper can be extracted from only a few trees species, they are softwoods, hardwoods, straw, esparto grass, bagasse and bamboo. In addition, papermaking fibre is derived from cotton, linen, abaca and sisal (1).Around 90% of the wood used by the European paper industry comes from European forests, because of that the European paper industry is strongly committed to sustainable forest management system and uses wood certified to PEFC and FSC standards, this a certification system help the sustainable management of the forest and control the industry that uses the forest as a main raw material.(2)There are environmental impact in paper industry because the main resource of this industry come from nature(forest fibres) and because of that the European paper industry consider  the bio-based economy it takes all the components in wood and transforms them into value-added bio based products not only looking for pulp and paper but also consider the biorefinery concept, such as , while wood fibre is used to make pulp, resins can be turned into chemicals and bark into renewable energy and resources, and can be process steam use to heat homes, and this the good idea and options to reducing waste and pollution coming from this industry, Europe’s paper industry provides the ideal path from a fossil-based to a bio-economy.(2)Paper products and manufactureThere are a lot off paper products, generally, are categorized into five main categories, newsprint and magazine papers, printing and writing papers, sanitary and household, paper packaging materials and products and other specialised paper.The paper industry is one of the biggest and important industries in the world, around 400 million tons produced annually. (9) The Paper Manufacturing is a huge process that can be divided into two groups, the first for the manufacturing of pulp and paper and the second for the manufacturing of converted paper products.According to Pratima Bajpai, the paper is made in different stages(table 1)Pulping, to separate and clean the ?bresBeating and re?ning the ?bresDiluting to form a thin ?bre slurrySuspended in solutionForming a web of ?bres on a thin screenPressing the web to increase the density of the materialDrying to remove the remaining moistureFinishing, to provide a suitable surface for the intended end use.OperationProcessesRaw material preparationDebarkingChipping and conveyingPulpingChemical pulpingSemi-chemical pulpingMechanical pulpingRecycled paper pulpingChemical recoveryEvaporationRecovery BoilerRecausticizingCalciningBleachingMechanical or chemical pulp bleachingStock preparation and papermakingPreparation of stockDewateringPressing and dryingFinishingTable 1 Steps involved in the manufacturing of paper, Pratima Bajpai (2015).the wood is ?rst processed so that the ?bres are separated from the unusable fraction of the wood, the pulp making can be done mechanically through mechanical pulp((figure1 )  groundwood pulp, re?ning pulp, use a rotary millstone, to make the process easy they use the addition of water. and to cool down the millstone. The pulp is then filtered to ensure that the final pulp contains only cellulose fibre.  in the end, the pulp is cleaned to remove sand or dust. (13)Figure 1 Mechanical pulp, (SCA, 2010)Also there chemo-mechanical pulp (figure 2), the chemical used to break down the lignin, that lignin bind celluloses fibres together, this process made under temperature 150°C – 200°C. in the end, the pulp is filtered and cleaned. (13) SCA, 2010)                                                                                                                                          Figure 2 Chemi-mechanical pulp, (SCA, 2010)In all methods, the temperature is increased to soften the lignin or can be done chemically( kraft, soda, and sulphite) under elevated temperature and pressure to extract pulp ?bres, then bleached and further processed, depending on paper required. (9) In the paper factory, the next step is dried and pressed to produce paper sheets. (figure 3)Figure 3 Overview of the kraft pulping mill with papermaking system, USEPA ( 1998 )Some integrated pulp and paper mills manage multiple operations such as the chemical pulping, bleaching, and papermaking. The pulp needs washing to get pulp free of unwanted chemical solubles. (9) This one of environmental impacts for this industry, how and where to discharge the chemicals after use(pollutant discharges and emissions).the most basic method is the replacement of the contaminated liquor accompanying the pulp ?bres by using clean water, the most common washing technology is rotary vacuum washing, carried out in two, three, or four washing units. (9). (figure 3, 4)Figure 4 Diagram for a typical papermaking process, Pratima Bajpai (2015).According to CEPI, 56% of the pulp and paper mill energy consumption is bioenergy and this equating to 20% of European bioenergy consumption, 1m³ of wood, the  industry creates 2.38 times more products and energy as compared to using that cubic meter in a single use. (2)Pulp and paper mills manufacture are ideal sites for biorefineries. Because paper and forest products companies are efficient growers, harvesters, transporters, and processors of biomass; pulp and paper mills are located near different sources of biomass, such as forest and agricultural residuals, and energy crops. (Connor, 2007)The paper industry can cause pollution and environmental impacts through dust, fumes and gases, water pollution from contaminated and chemical solvents, result from the pulping and bleaching processes (the chemical pulp manufacturing), noise pollution from materials handling and deliveries(7, 9).The EU and UK made regulations to control this pollution, the EU, through European environment agency made integrated pollution prevention and control regulation(Directive, 96/61/EC). (10). In the UK The Pollution Prevention and Control 2011 in England and Wales, in Scotland Regulations 2012 (PPC 2012) to implement the requirements of the Industrial Emissions Directive (IED), aim to remove ambiguities and inconsistencies, ensure clearer environmental benefits, promote cost-effectiveness and encourage technological innovation. (8)Paper disposal and life cycleThe recycling and recovery of paper continue to grow in the world, especially North America, that helps to reduce the high environmental impacts and costs of disposing of paper in landfills.  In  U.S. paper recovery rate increased from 46% in 2000 to 63.4% in 2009. In Canada, the reported paper recovery rate in 2009 was 66%.8.(11).In In European paper recycling rate increased from 71.5% in 2015 to 72% in 2016 and increased to 72.3% in 2017 is a significant step forward for paper recycling in Europe, European Declarations on Paper Recovery and Paper Recycling have the plan to reach the new target of a 74% recycling rate by 2020.(12)Figure 5 European paper recycling rate 1991-2015, (EPI 2016)Most of papers products are recyclable, such as cardboard, newsprint, and office papers. but also there is non-recyclable Paper like craft envelopes, carbon paper, paper towels and tissues.According to, Rick Leblanc. (2018), The paper recycling process has a number of steps:Collection: normally from bins and deposited in big recycling.Transportation: after collected paper waste then get transported in a truck.Sorting: sorted into different paper categories such as cardboard, newspapers, newsprint, magazine paper, to make easy to treated differently in the next stages of the process.Processing the Paper into Usable Raw Material:  this one of the most important stages, this process include:  Making Pulp or Slurry: Pulping involves water and chemicals.Pulp Screening and Cleaning: to remove contamination from the pulp.De-inking: After screening and cleaning come de-inking, which involves removing ink from the paper fibres of the pulp.Refining, Color Stripping, and Bleaching: In the refining stage, the pulp is beaten to make the paper fibres swell, if the goal to produce white recycled paper, the pulp is bleached with oxygen, chlorine dioxide, or hydrogen peroxide to make them brighter.New Papermaking: by cleaned paper pulp to be ready to be used in the production of new paper, in this stage, the paper pulp is mixed with chemicals and hot water, this chemical and wastewater can pollute and affect the environment.There are some solutions to avoid the impact of this industry, According to Chambost .V , Paper and Pulp companies need to considered one of the general the biorefinery concept, Firstly , biorefinery configurations that try to transform biomass into biofuels, and potentially benefit from an improved carbon footprint and carbon credits and its impacts on climate change, Secondly, Biorefineries that try to capitalise on the emerging huge biofuels market by produce ethanol or diesel production (Chambost et al., 2008).The policy regulations, such as, integrated pollution prevention and control regulation(EU, UK) to control this pollution, uses wood certified(PEFC, FSC) standards to manage the forest and control the paper industry that uses the forest as a main raw material.In addition, reuse or use alternative material that has less effect on our environment.Conclusions and RecommendationIn this report, I have identified the resources, manufacture and disposal of the paper industry and the environmental impact of resources and processes, the chemical and wastewater is the major source of polluting materials from the pulping and bleaching processes in this industry.One of the easy solutions by recycled cellulose fibres to reduce the quantity of water because the paper papermaking processes use a lot of energy and water, we need a real implementation of the regulations and environmental policy is important to reduce the impact from this industry on the environment.We need more research on using clean technology and about environmental impact and savier and easiest solutions for this pollutant impacts.ReferencesFAO, THE ECONOMIST INTELLIGENCE UNIT, LONDON. (). Paper’s new raw materials. Available: http://www.fao.org/docrep/x5370e/x5370e01.htm. Last accessed 30.01.2019.CEPI. (). Resource efficiency in the pulp and paper industry. Available: http://www.cepi.org/system/files/public/documents/publications/othertopics/2014/RESOURCES_EFF_CEPI_0.pdf. Last accessed 30.01.2019.Chambost V, Martin G, and Stuart PR. Identifying the forest biorefinery product portfolio. In: 18th International Congress of Chemical and Process Engineering. Prague, Czech Republic (24-28 August 2008).Connor,E., 2007. The integrated forest biorefinery: the pathway to our bio future. International chemical Recovery conference and energy management. 29 may – June,2017,Quebec city, Canada, pp.323 -327. )EEA . (2006). Paper and cardboard — recovery or disposal?. EEA Technical report. No5 (5), 29.Pratima Bajpai (2016). Pulp and Paper Industry. India: Elsevier. 334.Pratima Bajpai (2012). Biotechnology for Pulp and Paper Processing. Switzerland: Springer. 427.UK government . (2012). Pollution prevention and control regulations. Available: https://www.sepa.org.uk/regulations/pollution-prevention-and-control/. Last accessed 10.02.2019.Pratima Bajpai (2015). Pratima­ Bajpai Green Chemistry and Sustainability in Pulp and Paper Industry. Switzerland : Springer. p5-270.EEA . (1996). EU Integrated Pollution Prevention and Control.Available: https://www.eea.europa.eu/help/glossary/eper-pollution-register glossary/integrated-pollution-prevention-and-control. Last accessed 01.02.2019.The Environmental Paper Network (EPN). (2011). Steps Toward an Environmental Vision. The State of the Paper Industry. No1 (3), p5-37.European Paper Recycling council. (2016). EUROPEAN DECLARATION ON PAPER RECYCLING 2016-2020. Available: http://www.paperforrecycling.eu/. Last accessed 01.02.2019.SCA, 2010. Papermaking, s.l.: Assistance technique SCA Publication Papers.RICK LEBLANC. (2018). An Introduction to Paper Recycling. Available: https://www.thebalancesmb.com/an-introduction-to-paper-recycling-4036123. Last accessed 01.02.2019.